POWER & INCERINATORS
There is an emergent and growing need for the utilization and disposal of bioproducts and wastes of many varied types from both domestic and industrial sources. One such solution is incineration.
Fuel-efficient is safe and cost-effective but there is still considerable resistance to this technology from many sources since not all incinerators are as efficient as they should be.
One of the keys to the proper operation of all of these units is the choice and installation of the appropriate refractories in each zone of the lining.
Lintec offers reliable monolithic refractory and lining solutions designed to address the problems and issues encountered specifically in these facilities:
- Provide efficient and easy heat transfer to boiler tube walls
- Protect against the most abrasive and corrosive environments
- Adaptation to the demanding conditions needed to incinerate a variety of waste materials
- Withstand the heat and chemicals associated with NOx to N2 conversion
LINTECAST™
Range of low-cement vibro casting monolithics, including high alumina castables and silicon carbide (SiC) where slag and abrasion resistances are requested.
LINTEFLO SIC™
Self-flowing monolithics based on silicon carbide with superior wear resistance to serve the critical applications of incinerators and power plants providing efficient and easy heat transfer to boiler tube walls.
Excellent use also for back.
LINTEGUN™
High-purity, silicon carbide gunning mixes designed for abrasion resistance that exhibit excellent thermal conductivity and provide quick and easy repairs.
LINTPATCH™
Plastic ramming and patching chemically bonded products Ready to use for quick repairs of tiles, collector grade, and burners. can be installed in the most difficult of incinerator geometries.
Supplied in plastic drums of 20 Kg.
ZYPCAST™ – ZYPGUN™
ZYPCAST and ZYPGUN series are designed with nano-bond technology for fast setting and rapid heat up with superior mechanical and thermomechanical properties; low porosity and fast dry-out.
LINTEPLATE™
High purity silicon carbide tiles with nitrate bond.
